For photovoltaic modules, the front side is most vulnerable to external impacts, so the front glass material determines the degree of solidity and impact strength of the module, which can be defined as toughened and semi-toughened modules according to the front glass material. Semi-tempered modules consist of two pieces of semi-tempered glass (both 2.0mm) laminated with adhesive film and battery cells on both sides. While fully toughened power generation modules are made of fully toughened glass (2.5mm/3.2mm/2.8mm) on the outermost side of the front side and organic transparent backsheet on the outermost side of the back side.
Automatic Cell EL+IV Sorting Integrated Machine
Application:
Applicable to all kinds of solar cell whole wafer, half wafer and other materials sorting.
Technical Parameter:
| Test size: | 230×230mm |
| Camera: | 20 million pixels |
| Workpiece specification: | 4 loading boxes |
| Capacity: | 1500 pieces/hour |
| Uptime (up time): | ≥99% (normal downtime is not calculated) |
| Mean time between failures (MTBF): | MTBF ≥ 500 hours |
| Mean time to repair failure (MTTR): | MTTR ≤ 1 hour |
| Ambient temperature/humidity: | 20～40℃/85 RH%u below |
| Noise: | ≤20dB |
| Cleanliness: | in line with the requirements of 100,000 class clean area related specifications |
| Discharging station: | 24 discharging stations (standard machine) |
| Input voltage: | 220VAC/50HZ |
| Machine power consumption: | 3KW |
| Equipment Size: | 4200mm*2000mm*1970mm |
| Weight: | 800kg |